Copper Golden Fusion – Cut and Color

Copper Golden Fusion – Cut and Color

Formula 1:

1/2oz. 8C + 1/2oz. 7C + 1 Capful Gold Additive + 15 Vol Generator (1/2oz 10vol+ 1/2oz 20vol)

Formula 2:

CHI Chromashine Color Orange You Obsessed + Pearl White

Formula 3:

CHI Chromashine Color Dangerously Red + Pearl White

**Spray hair with CHI Keratin Mist to even out porosity before color service**

Step 1:

Apply Formula 1 down the center part from forehead to nape.

Step 2:

Work your way around the head using diagonal partings applying Formula 1 to roots ONLY.

Step 3:

Apply Formula 1 to entire undercut section from mid ear down.

Step 4:

Take forward diagonal partings and apply color in rotating pattern alternating between formulas 1, 2 & 3 until entire head is completed.

**Process at room temperature for 30 minutes.

*Rinse, shampoo, color lock and style as desired.

Sectioning Step 1:

Take a triangle section at the fringe to the apex.

Step 2:

On each side, section from apex to behind the ear.

Step 3:

Create a section from ear to ear at the occipital bone.

Cutting Step 1:

To create the undercut take vertical sections holding hair at a 90 degree angle and razor cut.

Cutting Step 2:

Clean up the perimeter and texturize using scissor over comb technique.

Cutting Step 3:

Release subsection above the undercut. Over direct hair to the opposite side and point cut from shorter to longer. Continue to release subsections and repeat throughout back occipital section.

**Stylist Tip: To create the same length on both sides keep fingers pointed upwards and make sure elbow is at same angle as fingers, lock your wrist for tight elevation.

Cutting Step 4:

Release side section, over direct towards the back of head and point cut. Release other side, take a small section from each side pulling to chin and cut to create a guide for the second side. Cut second side section using the same technique as before.

Cutting Step 5:

Release fringe section, comb from underneath and point cut longer than desired length. (You will finish cutting when dry)

** Apply Mousse and comb through. Blow dry using your choice of CHI dryers and brushes.

Cutting Step 6:

Dry cutting, comb underneath fringe section and point cut to desired length.

Cutting Step 7:

Taking vertical sections at the nape bring hair out at 90 degree angle. Using texturizing shears slice and lift hair to create movement and texture throughout.

** Style as desired**

Cranberry Merlot – Cut and Color

Cranberry Merlot – Cut and Color

CHI Shine Shades Formula 1:

2 Parts 6RV + 1 Part 8RV + 10 Volume Generator.

Formula 2:

CHI Blondest Blonde + 10 Volume Generator.

Formula 3:

8V + 10 Volume Generator.

*Before Color Application spray hair with CHI Keratin Mist to even out porosity.

Step 1:

Apply Formula 1 to root area.

Step 2:

Starting at the nape take diagonal forward sections alternating formula 1, 2, & 3 until the entire head is completed.

**Stylist Tip: Separate formula 2 using foils

 **Process at room temperature for 30 mins

** Rinse, shampoo, color lock and style as desired**

**Apply  CHI Silk Infusion throughout hair as a cutting agent**

Sectioning Step 1:

Take a triangular section at the fringe to the apex.

Step 2:

Take side section from the apex to behind the ear. Repeat on other side.

Step 3:

Take triangular section at the crown.

Step 4:

Split back section into smaller subsections.

Cutting Step 1:

Starting at the nape point cut hair at a diagonal, parallel to the part. Continue until you reach the occipital bone.

Step 2:

At occipital bone begin to create subtle graduation.

Step 3:

Release first side section, in smaller subsections over direct hair back and cut. This will create length in the front. Repeat on opposite side.

Step 4:

Release crown section, over direct to the center and point cut through section. This will create long layers.

Step 5:

To blend layers, over direct hair back to the center of head and point cut.

Step 6:

Release fringe section, split into a center part and cut to connect length to sides.

Step 7:

Over direct hair forward and slice cut to create face framing layers.

Step 8:

Connect layers from the front and the crown by over directing the hair to the center of the head and point cut.

Step 9:

To create added texture flip hair at crown forward and notch.

**Blow dry away from head to create volume**

Step 10:

Taking vertical sections using texturizing shears slice through hair at a 90 degree angle to remove bulk and weight.

Step 11:

Take fringe section flip over and slice from underneath using texturizing shears.

OUR FAMILY: CHI Haircare | Biosilk | Farouk systems | Beyond Glow Skin Care